X
Ball-screw driveX axis · BSFE080
Long-travel base axis
- Travel range
- 50–1100 mm
- Ball-screw lead
- 10 mm
- Maximum speed
- 500 mm/s
- Axis repeatability
- ±0.01 mm
- Motor reference
- 400 W
MULTI-AXIS MOTION SYSTEM
Integrated-Guide Cantilever XYZ Ball-Screw System
MX-CT3-IB-01MXMulti-axis systemCT3Three-axis cantilever architectureIBIntegrated-guide ball-screw platform01Platform size index
A 3-axis positioning platform with clearly defined X, Y and Z motion roles. Select travel, motor-side orientation, motion package and delivery scope for an engineering quotation.
FIXED AXIS ARCHITECTURE
3 controlled axes with defined motion roles
The axis families and drive principles are fixed for this platform. Travel and project options are selected below.
Y
Ball-screw driveY axis · BSFE050
Cross-travel axis
- Travel range
- 100–500 mm
- Ball-screw lead
- 10 mm
- Maximum speed
- 500 mm/s
- Axis repeatability
- ±0.01 mm
- Motor reference
- 100 W
Z
Ball-screw driveZ axis · BSFE050
Vertical process axis
- Travel range
- 50–250 mm
- Ball-screw lead
- 5 mm
- Maximum speed
- 250 mm/s
- Axis repeatability
- ±0.01 mm
- Motor reference
- 100 W with brake
CONDITIONAL PERFORMANCE
Performance follows the selected travel
Use the table and live summary together. Final suitability also depends on load center, acceleration and duty cycle.
Allowable payload
The current travel combination is highlighted.
| Y \ Z (mm) | 50 | 100 | 150 | 200 | 250 |
|---|---|---|---|---|---|
| 100 | 8 | 8 | 8 | 8 | 8 |
| 150 | 8 | 8 | 8 | 7.8 | 7.6 |
| 200 | 7.5 | 7.3 | 7.1 | 6.9 | 6.7 |
| 250 | 7 | 6.6 | 6.2 | 6 | 5.8 |
| 300 | 6.5 | 5.9 | 5.3 | 5.1 | 4.9 |
| 350 | 5 | 4.4 | 3.8 | 3.6 | 3.4 |
| 400 | 3 | 2.8 | 2.6 | 2.4 | 2.2 |
| 450 | 2 | 1.8 | 1.6 | 1.4 | 1.2 |
| 500 | 1 | 0.8 | 0.6 | 0.5 | 0.5 |
PRELIMINARY CONFIGURATION
Build a customer-readable RFQ reference
Record the information needed for quotation discussion. This reference is not a final product designation.
ORIENTATION & ENGINEERING DATA
Choose the motor-side orientation, then review dimensions
The direction schematic identifies the arrangement; the full-width engineering drawing carries the dimensional detail.
O1
Y left / X motor left
Direction-identification schematic. Use the drawing below for dimensions.
L—
H—
A—
P—
Dimension key
Loverall X assembly lengthHoverall installed heightAend mounting offsetPX-axis mounting span
Complete dimensions and permitted-speed tablesOpen by default · click to collapse
X-axis travel, mounting dimensions and permitted speed
Lettered dimensions correspond to the callouts on the full-width engineering drawing; M = number of the stated mounting-pitch intervals; N = number of mounting holes in the axis mounting pattern.
| X travel (mm) | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| L (mm) | 314.5 | 364.5 | 414.5 | 464.5 | 514.5 | 564.5 | 614.5 | 664.5 | 714.5 | 764.5 | 814.5 | 864.5 | 914.5 | 964.5 | 1014.5 | 1064.5 | 1114.5 | 1164.5 | 1214.5 | 1264.5 | 1314.5 | 1364.5 |
| A (mm) | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 | 50 | 100 |
| M | 1 | 1 | 2 | 2 | 3 | 3 | 4 | 4 | 5 | 5 | 6 | 6 | 7 | 7 | 8 | 8 | 9 | 9 | 10 | 10 | 11 | 11 |
| N | 6 | 6 | 8 | 8 | 10 | 10 | 12 | 12 | 14 | 14 | 16 | 16 | 18 | 18 | 20 | 20 | 22 | 22 | 24 | 24 | 26 | 26 |
| P (mm) | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 | 1050 | 1100 |
| Maximum speed (mm/s) | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
Y-axis travel, installation dimensions and permitted speed
Lettered dimensions correspond to the callouts on the full-width engineering drawing.
| Y travel (mm) | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
|---|---|---|---|---|---|---|---|---|---|
| H (mm) | 394.5 | 444.5 | 494.5 | 544.5 | 594.5 | 644.5 | 694.5 | 744.5 | 794.5 |
| Maximum speed (mm/s) | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 | 500 |
Z-axis travel options
Shown selection range: 50–250 mm. Detailed installation dimensions are confirmed on the approved project drawing for the selected travel.
Cable-routing provision
Allow routing space for moving power, signal and sensor cables. Carrier size and installation details are confirmed with travel and delivery scope.
Selection conditions
- Longer travel may reduce permitted speed.
- Confirm homing, limits and cable routing with the controls package.
- Final interface dimensions are supplied on the approved project drawing.
APPLICATION FIT
Typical motion tasks
Final suitability depends on the actual load and motion profile.
Vision inspection
Scanning and measurement across a defined work area.
Transfer and handling
Repeatable point-to-point positioning of tools or workpieces.
Dispensing and processing
Controlled path motion for dispensing, coating or light process tasks.
PRODUCT-SPECIFIC INQUIRY
Send the selected configuration
The RFQ reference and application requirements will be included in the email.
