MULTI-AXIS MOTION SYSTEM

Gantry XYZ Ball-Screw System

MX-GT3-BS-02

A 3-axis positioning platform with clearly defined X, Y and Z motion roles. Select travel, motor-side orientation, motion package and delivery scope for an engineering quotation.

Configure for RFQView dimensions
MX-GT3-BS-02 Gantry XYZ Ball-Screw System
FIXED AXIS ARCHITECTURE

3 controlled axes with defined motion roles

The axis families and drive principles are fixed for this platform. Travel and project options are selected below.

X

X axis · BSS220

Large-frame ball-screw base axis

Ball-screw drive
Travel range
100-1500 mm
Ball-screw lead
25 mm
Maximum speed
1250 mm/s
Axis repeatability
±0.01 mm
Motor reference
750 W
Y

Y axis · BSS170

Ball-screw cross-travel axis

Ball-screw drive
Standard selectable travel
250–1050 mm
Ball-screw lead
20 mm
Maximum speed
1000 mm/s
Axis repeatability
±0.01 mm
Motor reference
750 W
Z

Z axis · BSS140

Ball-screw vertical process axis

Ball-screw drive
Travel range
100-550 mm
Ball-screw lead
10 mm
Maximum speed
500 mm/s
Axis repeatability
±0.01 mm
Motor reference
400 W with brake
CONDITIONAL PERFORMANCE

Performance follows the selected travel

Use the table and live summary together. Final suitability also depends on load center, acceleration and duty cycle.

Allowable payload

The current travel combination is highlighted.

Z travel (mm)100150200250300350400450500550
Allowable payload (kg)18181818181818181818
PRELIMINARY CONFIGURATION

Build a customer-readable RFQ reference

Record the information needed for quotation discussion. This reference is not a final product designation.

Travel and orientation
Motor, drive, sensing and delivery

When HS LINEAR supplies the motion package, the motor and drive are quoted together as one compatible same-brand package.

Application and requested documents
ORIENTATION & ENGINEERING DATA

Choose the motor-side orientation, then review dimensions

The direction schematic identifies the arrangement; the full-width engineering drawing carries the dimensional detail.

O1

Y axis left · X motor side left

Direction-identification schematic. Use the drawing below for dimensions.

MX-GT3-BS-02 O1 orientation schematic
MX-GT3-BS-02 O4 engineering dimension drawing
Reference engineering dimensions
L—
H—
A—
P—

Dimension key

Loverall X assembly lengthHoverall installed heightAend mounting offsetPX-axis mounting span
Complete dimensions and permitted-speed tablesOpen by default · click to collapse

X-axis travel, mounting dimensions and permitted speed

Lettered dimensions correspond to the callouts on the full-width engineering drawing; M = number of the stated mounting-pitch intervals; N = number of mounting holes in the axis mounting pattern.

X travel (mm)10015020025030035040045050055060065070075080085090095010001050110011501200125013001350140014501500
L (mm)5225726226727227728228729229721022107211221172122212721322137214221472152215721622167217221772182218721922
A (mm)10015020050100150200501001502005010015020050100150200501001502005010015020050100
P (mm)330380430480530580630680730780830880930980103010801130118012301280133013801430148015301580163016801730
B (mm)1510353025201510353025201510353025201510353025201510353025
C (mm)5667891011111213141516161718192021212223242526262728
M11122223333444455556666777788
N666888810101010121212121414141416161616181818182020
Maximum speed (mm/s)125012501250125012501250125012501250125012501250125012501250125012501125112510001000875875750750625625500500

Y-axis travel, installation dimensions and permitted speed

Lettered dimensions correspond to the callouts on the full-width engineering drawing.

Y travel (mm)25030035040045050055060065070075080085090095010001050
H (mm)85590595510051055110511551205125513051355140514551505155516051655
Center distance J (mm)625675725775825875925975102510751125117512251275132513751425
Maximum speed (mm/s)10001000100010001000100010001000100010001000100010001000100010001000

Z-axis travel, installation dimensions and permitted speed

Z travel (mm)100150200250300350400450500550
Installed height excluding motor (mm)365415465515565615665715765815
Maximum speed (mm/s)500500500500500500500500500500

Cable-routing provision

Allow routing space for moving power, signal and sensor cables. Carrier size and installation details are confirmed with travel and delivery scope.

Selection conditions

  • Longer travel may reduce permitted speed.
  • Confirm homing, limits and cable routing with the controls package.
  • Final interface dimensions are supplied on the approved project drawing.
APPLICATION FIT

Typical motion tasks

Final suitability depends on the actual load and motion profile.

Vision inspection

Scanning and measurement across a defined work area.

Transfer and handling

Repeatable point-to-point positioning of tools or workpieces.

Dispensing and processing

Controlled path motion for dispensing, coating or light process tasks.

PRODUCT-SPECIFIC INQUIRY

Send the selected configuration

The RFQ reference and application requirements will be included in the email.